This article contains information on how to fix leaking issues on the PowerScrub Elite
NOTE: The PowerScrub tank is split in two, one section is for clean water and the other for cleaning solution.
TIP: Do not overfill your solution tank, doing so could cause over foaming in the dirty water tank, leading to a liquid bypass and, hence leaking.
WARNING: If you notice any cracks or tears in your tank, please contact our customer service team.
If your PowerScrub Elite is leaking, follow the following steps:
- Make sure your clean water and solution tanks are not overfilled and placed properly on the unit.
- If necessary, empty the dirty water tank and place it properly on the unit, do this with the tank pointing down to ensure proper sealing.
- Also, check there are no gaps on the tank lid to ensure no leakage and proper suction.
TIP: Once done cleaning is recommended to run your unit for a couple of minutes, allowing the water to make its way to the dirty water tank will reduce the leaking once the unit is stored away.
TIP: It's recommended to store the unit on top of something absorbent, some leaking is normal after usage.
The Hose extension is leaking
- Make sure your Hose and solution port are properly attached and locked in the unit.
- Check that your attachment tools are properly installed.
NOTE: If you have tried to troubleshoot and need to fill a warranty claim, please visit our Warranty Information page for more information on how to do so.