This article contains all the steps necessary to fix dispensing issues with your PowerDash Pet Hardfloor.
TIP: Check that your clean water tank is properly installed in the unit and filled.
TIP: Before cleaning, hold down the dispensing trigger for up to 1 minute to prime the pump of any air trapped inside.
To fix dispensing issues follow these steps:
- Check that your handle is installed correctly by pushing it down into position.
- Once the handle is in position, you should hear a click.
- Recline your unit, the unit will not dispense in the upright position.
- PUSH forward and press the trigger to dispense water/ solution
PULL the unit back without pressing the trigger to dry
.
TIP: If your unit continues not dispensing fill your clean tank with warm water only and run the machine for a while, this should help remove any gunk inside the distributor bar.
Some customers have found the video below helpful to unclog the distributor bar.
NOTE: If you have tried to troubleshoot and need to fill a warranty claim, please visit our Warranty Information page for more information on how to do so.