This article contains information on how to fix dispensing issues on the corded CleanSlate
TIP: Before cleaning, prime the pump. Attach the hose rinse-tool and press the dispensing trigger for up to 1 minute to rid any air trapped in the hose.
TIP: Make sure your clean water and cleaning solution tanks are filled to the correct measure.
TIP: Remember to press the handle trigger to dispense water and solution, then release the trigger to dry all the water.
CleanSlate does not dispense water/solution.
- First, confirm your clean water/ solution tank is properly placed in the unit
- If your unit continues not dispensing, add hot water to your clean water and solution tank. Run your unit with hot water for a couple of minutes to help remove any build-up gunk inside the nozzle distributor bar.
- Once you've ran your unit with warm water make sure your hose end and accessories are clean and there are no clogs.
CAUTION: Sometimes the solution hose inside the hose gets kinked or pinched. Pull the hose straight to get it back to position.
NOTE: If you have tried to troubleshoot and need to fill a warranty claim, please visit our Warranty Information page for more information on how to do so.